Plinius CD LAD, Инструкция по эксплуатации

Страница: 18 / 21

18
Disconnect the lead from the IEC socket on your Plinius CD ⋅ LAD and make sure the Mains switch is OFF.
Carefully remove the lid by undoing the 4 posi-drive screws underside. Locate the mains terminal block
with a clear perspex guard to the left rear of the preamplifier. Remove the guard by undoing the M3 nuts.
V
OLTAGE
C
ONFIGURATION
W
IRING
L
ABEL
With reference to the voltage configuration wiring label, attached next to the connector block, remove the
ring terminals on the transformer side of the connector block. Take care to ensure correct orientation of
the wires. Now re-assemble your Plinius CD
⋅ LAD. If you experience any problems consult your PLINIUS
PLINIUS PLINIUS
PLINIUS
Dealer.
IMPORTANT: DOUBLE CHECK THE WIRE ORIENTATION BEFORE
REFITTING THE PREAMPLIFIER LID.