Plinius CD LAD, Инструкция по эксплуатации

Страница: 14 / 21

14
S
ETTINGS
M
ENU
S
TRUCTURE
A major feature of your Plinius CD ⋅ LAD Preamplifier is the settings menu. Options such as balance,
display brightness and CD input type are all configured via this menu.
FRONT PANEL BUTTONS
The buttons on the front panel concerned with the settings menu are the three along the bottom left
labelled Mute/Down, Menu/Enter, and Phase/Up. The bottom three functions (Down, Enter, Up) are only
active after pressing Menu (to access the settings menu). Also, remember that the Source button that is
used to toggle between the three inputs on the CD
⋅ LAD is not active when the settings menu is being
adjusted.
USING THE SETTINGS MENU
After pressing the Menu button, the settings menu can be accessed. The Down and Up buttons can then
be used to scroll through the following sub-menus:
Display Off
Display Off Display Off
Display Off
Standby
Standby Standby
Standby
Balance
Balance Balance Balance
Bypass
Bypass Bypass Bypass
Display
Display Display Display
CD Mode
CD Mode CD Mode CD Mode
Exit
Exit Exit Exit
To enter any sub-menu listed above, press the Enter button. Adjust the settings of the sub-menu chosen
using the Down and Up buttons and when finished press Enter to return to the main display. The diagram
following is a visual reference of this system, and each sub-menu is described in detail below.
MEMORY STORAGE OF SETTINGS
The settings that you access below are all stored in the memory of the CD ⋅ LAD microcontroller. Next time
you turn on the preamplifier, any settings you have changed (balance level, CD input type, display
brightness etc.) will be enabled in that same configuration.