Plextor PX-760, Инструкция по установке и эксплуатации

Страница: 24 / 112

Section 2. Installing the PX-760A Internal ATAPI Drive
16
PX-760 Installation and Users Manual
Install the Bezel
If the PX-760A drive’s current front-panel color is suitable for your
computer, you can proceed to “Mount the PX-760A Drive” below. But
if you want to change the bezel color, first install the ivory or the black
bezel and disc tray front panel as outlined under “Changing the Front-
Panel Color” on page 58.
Mount the PX-760A Drive
Here’s an overview of what you’ll do to mount the drive:
1.
Turn OFF your computer system.
2. Set the jumpers for your new PX-760A drive, if necessary.
3. Mount the drive into an available drive bay inside the computer
system.
4. Make all necessary cabling connections: IDE cable, power cable, and
audio cable.
5. Turn your computer system ON.
The following pages give more details for this procedure.
Open the Computer and Prepare for
Installation
To determine whether your PX-760A will be a Master or a Slave, open
your computer and examine the IDE connections to the motherboard.
To open the computer:
1. Before proceeding, make sure the power to your computer and any
external peripherals is OFF and your computer is UNPLUGGED
from its power source.