PX-755SA Installation and Users Manual
9
2. Installing the
PX-755SA Internal SATA Drive
This section explains how to physically install your PX-755SA internal
Serial ATA drive in your computer. The steps are as follows:
1. Turn OFF your computer system.
2. Mount the drive into an available drive bay inside the computer
system.
3. Make the cabling connections: Serial ATA cable and power cable.
4. Turn your computer system ON.
The following pages give more details for this procedure.
NOTE
: Your computer’s SATA connection must support the ATAPI
command set. Some computer motherboards have SATA RAID
(Redundant Array of Independent Discs) chipsets that do not support the
ATAPI command set used by optical disc drives, or that do not have
BIOS settings to enable IDE/ATAPI functions. If you are unsure, consult
your motherboard manual or vendor web site for compatibility, BIOS
versions, and BIOS settings. And check the Plextor PX-755SA
motherboard compatibility listing at
http://www.plextor.com/english/support/support_compatability.html
PX-755SA Drive Features and Controls
Before proceeding, become familiar with the controls and features of
your Plextor drive. Match the parts of your drive to the illustrations
below.
Содержание PX-755
Страница 32: ...Section 3 Using Your PX 755SA 26 PX 755SA Installation and Users Manual This page intentionally left blank...
Страница 60: ...Appendix A PX 755SA Specifications 54 PX 755SA Installation and Users Manual This page intentionally left blank...
Страница 73: ...PX 755SA Installation and Users Manual 67 Notes...