Plextor PX-712UF, Инструкция по установке и эксплуатации

Страница: 52 / 112

Section 4. Advanced Features and PlexTools Professional
44
PX-712UF Installation and Users Manual
Burning a Disc with GigaRec
To use PlexTools Professional to burn a GigaRec disc:
1. Insert a blank CD-R disc in the Plextor PX-712UF drive. (You can’t
use DVD±R/RW or CD-RW discs with GigaRec.)
2. In the PlexTools menu bar, select Drive Settings. You see the tabs
for drive settings.
3. Select the GigaRec tab. You see the GigaRec window. At the bottom
of the GigaRec window you can see information about the disc
currently in the drive. The disc capacity and recording time are
shown.
Figure 12: Selecting the GigaRec writing capacity
4. To enable GigaRec, place a check mark in the Enable GigaRec box.
5. Move the slider to one of the GigaRec Rate numbers to select the
capacity. For example, choosing 1.2x increases the disc’s writing
capacity by 20 percent. So the capacity of a 703-MB disc is
increased to 850 megabytes (Mode 1), or about 96 minutes.