Plextor px-128m2s, Быстрое руководство по установке

Страница: 3 / 146

002
Storage of Con fi dence
02
Plextor SSD Installation Guide:
Thank you for purchasing Plextor solid-state drives, brought to you by the brand name that has been leader in digital world. We hope you enjoy
the experiences with this new drive.
1.Unpacking your drive:
a. Plextor Solid-State Drive
b. Image HD Software Disc
2.Installing your drive:
a. Installing SSD drive in a new computer or as an additional drive:
i. Refer to your computer
’
s user manual on how to unplug power plug (and remove battery from a notebook), then open your computer case.
ii. Install the new SSD drive by connecting power and SATA cables, and then close up your computer case.
iii. Plug in power plug (replace battery in notebook) and power on your computer.
iv. Allow your computer operation system to detect and install new devices.
v. Once fi nished, your drive will be ready to use*
b. Using SSD as an external device:
i. Select an external enclosure that is 2.5
”
form factor and supports SATA interface.
ii. Install the SSD inside the enclosure, and connect to PC with USB cable(s) (If the enclosure comes with additional power options, such as a
second USB cable, we recommend using it to avoid possible power interruption)
iii. Allow your computer
’
s operation system to detect, install new devices.
iv. Once fi nished, your drive will be ready to use. *
*Notes and Hints:
1. Plextor SSD drive is preformatted with NTFS fi le systems, so it is ready to use. If you need to reformat the drive to any other format, use
“
quick format
”
options only!
2. Always handle the SSD drive with care, avoid excessive heat, moisture and direct sun light. Never bent, fl ex or drop the SSD drive
3. During normal usage, Plextor SSD drive has built-in self clean, and maximization features, so it is NOT necessary to
“
defrag
”
SSD drives
c.If you are planning to replace an existing hard disk drive in your system, and will use the included Acronis True Image HD software to back up
your original disk, please refer to guide inside the software envelope.