Plextor Plextalk PTR1, Руководство пользователя

Страница: 177 / 223

Section 12, Connecting to a
-156-
12. Click next for you see a bar showing progress, followed by a dialog box
indicating that installation of the driver was successful.
13. Select Finish.
The procedure above loads the necessary drivers into the PC. After this procedure,
the Plextalk drive should be recognized automatically by Windows 98SE on your
PC.
12.4 Making Sure the Plextalk Is Recognized
After installation, make sure the Plextalk is recognized by your PC. To check
whether it is recognized:
1. Turn the PC ON. PC.
2. Open Windows Explorer or My Computer and ensure there is an icon for the
Plextalk. The Plextalk may be D: or E: or another designator.
3. In Windows 98SE or Me, once the system comes up click the Start key, then
Settings, then Control Panel, then double-click on System icon, then click on
Device Manager tab. Click the + sign next to the CD-ROM heading and make
sure you find the “PLEXTOR CD-R PX-S88T” listed underneath.
In Windows XP or 2000, right-click on the My Computer icon and select
Properties. Click on the Hardware tab, then click on the Device Manager button.
Click the + sign next to the CD-ROM heading and make sure you find the
“PLEXTOR CD-R PX-S88T” listed underneath.
4. If you do not see this drive listed as one of the devices, or if it has a yellow
diamond with an exclamation point (!), contact your PC or motherboard
manufacturer for help, and to troubleshoot your USB controller or driver
compatibility or conflicts. It may just be a matter of obtaining the latest USB
driver, or a motherboard BIOS update, from the manufacturer.
12.5 Using the Plextalk as a CD-R/RW Drive
CD-RW media comes in more than one type. If you are writing at 4X speed or
greater, use media marked as “high-speed” media. If you are writing at speeds from
1-4X, you can use standard CD-RW media.
12.6 Removing the Plextalk from Your PC
If you need to remove the Plextalk from your PC, choose the appropriate procedure
below.