FWB Toolkit Macintosh
Device Driver Installation
1) To begin installation, insert the FWB floppy disk into your disk drive. Make
sure that power to your CD-ROM drive is OFF.
2) Drag each icon from the driver window into your SYSTEM FOLDER.
SYSTEM 7 USERS: At this point a dialog box will appear telling you that these files
need to be stored in special places in the SYSTEM FOLDER. Click on OK and all the
files will be copied to their appropriate places.
SYSTEM 6 USERS: All files already are where they need to be. No further commands
are necessary.
3) Turn OFF the power to your Mac. Turn ON the power to your CD-ROM
drive, then turn ON power once again to your Mac.
4) Insert a caddy containing a CD-ROM disc (written in Mac format) into your
4PleX drive.
5) Your Mac will display the CD-ROM disc’s icon.
6) Double click on the icon to start the program.
CHAPTER 9 ---- Software Installation
PX-43CH/PX-45CH OPERATION MANUAL
37
