6
Plextor DVD Writer User’s Manual
Rear View
ATAPI/E-IDE Drives:
Figure: Rear view of ATAPI/E-IDE drive
Power Connector
Four-pin connector for DC power input.
Host IDE Interface
Connector
40-pin connector for E-IDE interface.
Device Configuration
Jumper
Six-pin jumper for selecting drive mode as an IDE master, slave, or cable
select.
Analog Audio Output
Connector
Four-pin connector for analog audio output. Use to connect to a sound
board or audio amplifier.
Digital Audio Output
Connector
Two-pin connector for digital audio data. For connecting to a sound board
that support Sony/Philips digital interface (SPDIF) or Digital-In.
Serial ATA Drives:
Figure: Rear view of Serial ATA drive
Serial ATA Power Connector
15-pin connector for DC power input.
Serial ATA Data Connector
7-pin connector for Serial ATA data interface.
