Pleora Technologies vDisplay HDI-Pro, Руководство пользователя

Страница: 31 / 88

Setting up and Configuring vDisplay IP Engines 27
Chapter 4
Setting up and Configuring vDisplay IP Engines
This chapter provides you with information to help you efficiently set up and configure the vDisplay IP
engine.
The following topics are covered in this chapter:
•
“Initial Setup” on page 28
•
“Connecting the Hardware and Power Supply” on page 29
•
“Setting up a Point-to-Point Video Network Configuration” on page 30
•
“Setting up a Unicast Video Network Configuration” on page 31
•
“Configuring the Multicast Video Transmission” on page 34
•
“Configuring Autonomous Control of Cameras” on page 38
•
“Controlling the vDisplay IP Engine Transport Layer” on page 48
•
“Controlling the Video Stream” on page 50
•
“Configuring the Buffer Count” on page 50
•
“Defining Partial Images” on page 51
•
“Controlling the Image Display” on page 56
•
“Configuring Channels” on page 63
•
“Controlling Image Processing” on page 67
•
“Saving Your Configuration Settings” on page 69
•
“Controlling Messages” on page 70
•
“Updating the vDisplay IP Engine Firmware” on page 72
•
“Accessing System Statistics” on page 74