30
vDisplay HDI-Pro IP Engine User Guide
Setting up a Point-to-Point Video Network Configuration
In a point-to-point network configuration, the vDisplay IP engine is connected between a GigE Vision
compliant camera and a video monitor. In the following figure, the vDisplay IP engine has been
previously configured using GEVPlayer to automatically find the camera on the network and command
it to send video, which is why the PC with GEVPlayer installed does not appear in the illustration.
For information about how to configure the vDisplay IP engine to automatically find GigE Vision compliant
video sources without further configuration, see “Configuring Autonomous Control of Cameras” on
page
Figure 3: Point-to-Point Video Network Configuration
