background image

 

 

COMPOSITION

 

 
Solar system 

ECO COMPACT

 is composed of the following articles: 

 

n.1 ECO COMPACT tank (available in sizes 200 liters, 300 liters, 500 liters). 

 

n.1, 2 or 3 solar collectors (X-RAY10, UNIKO, KSFG-25 or CSI model). 
The number of collectors depends on the size of the tank, according to the following scheme: 

-

 

n.1 collector for 200 liters; 

-

 

n.2 collectors for 300 liters; 

-

 

n.3 collectors for 500 liters. 

 

n.1 expansion vessel (18 liters for 200 liters, 24 liters for 300 liters, 35 liters for 500 liters). 

 

n.1 sensor pocket. 

 

n.1 thermostat valve 35 ° / 60 ° C. 

 

n.1  fittings  for  the  plumbing  connection  to  solar  collectors  (depends  on  the  type  and  the 
number of collectors). 

 

Solar and antifreeze liquid (depends on the type and the number of collectors). 

 

GENERAL INFORMATION 

 
Installation  must  be  carried  out  only  by  qualified  personnel  according  to  safety  norms  and 
regulations  and  as  instructed  in  this  document.  Only  original  components  specific  for  this  solar 
system must be used. 
Before installation and start-up, please consult local norms, laws and by-laws. 
Suitable restraining belts must be used during collector and tank transport. Do not lift the collector 
and the  tank by the screw thread connections. Avoid hitting the collector and fragile glass tubes 
which might smash. 
 

ECO COMPACT TANK 

 
Description 
 
Tank with double glazing in accordance with DIN 4753, available in sizes 200-
300-500 liters, two fixed exchangers, predisposition for electrical resistance on 
a  sleeve  at  the  center  part  of  tank,  rigid  polyurethane  foam  insulation  and 
finish with PVC outer white. 
Complete  with  two-way  compact  solar  station  with  pump  high  efficiency, 
safety  unit  6  bar  with  manometer,  solar  control  unit,  3  PT1000  temperature 
sensors,  all  these  fully  assembled  and  wired  in  a  frontal  cover  made  of  ABS 
red.

Содержание ECO COMPACT 200












Отзывы: