Pleasure-Way PLATEAU FL 2020, Руководство пользователя

Страница: 26 / 68

20
COOKTOP
Please refer to the manufacturer’s operating instructions for
further information.
The vehicle is equipped with a two-burner flush mount cooktop
located in the kitchen counter top.
1. Lift the glass cover.
2. Turn the selected burner knob to ignite (flame) position
and hold the button in. This allows propane to flow to
the selected burner. Hold the button for a couple of
seconds before pressing the igniter.
3. Depress the middle ignition spark knob several times until
the burner ignites.
4. Turn the burner knob to adjust the flame to the
appropriate heat setting.
5. When you have finished using the cook top, turn the
burner knob to the off position allow the burner to cool
before closing the cook top cover.
FURNACE
Please refer to the manufacturer’s operating instructions for
further information.
Your vehicle is equipped with a 16,000 BTU Atwood LP gas
Auto Ignition Furnace. The furnace is located near the floor
below the fridge. The thermostat control is located on the
touchscreen control panels.
1. Ensure that there is propane supplied to the coach.
2. Ensure there is 12V power to the coach.
3. Turn the thermostat to the FURN position and set the
thermostat to the desired temperature.
4. The furnace fan will come on, the furnace will auto ignite
and cycle through the fan and heating process. The
furnace will maintain the desired temperature.
FURNACE RESET BUTTON
FL -
Access is underneath the driver side ottoman cushion and
behind the black round cover.
TS - Access is through the bottom exterior fridge vent. Remove
the fridge vent and then remove the white round hatch to
locate the reset.
NOTE:
Set the thermostat fan mode to auto to prevent the
AC fan from coming on in furnace mode.
FL
TS