Pleasure-Way PLATEAU FL 2020, Руководство пользователя

Страница: 25 / 68

19
LP FILL VALVE & LP BLEEDER VALVE
The bleeder valve allows pressure to vacate the LP tank when
80% full. The fill valve, is covered by the yellow end cap.
LP TANK GAUGE
This gauge indicates how full the LP tank is. The LP gauge is
located on the tank with a sending unit that sends levels to the
touchscreen control panels.
HOW TO USE THE LP APPLIANCES
Turn ON the 12 volt battery disconnect switch, located below
the entrance touchscreen control panel.
Turn ON the LP electric valve.
(located in the driver side utility center).
WARNING
: DO NOT FILL LP CONTAINER TO MORE
THAN 80% CAPACITY. Overfilling the LP gas container
can result in uncontrolled gas flow, which can cause a
fire or explosion. A properly filled container will contain
approximately 80% of its volume of LP gas.
BBQ QUICK CONNECT
The BBQ quick connect is directly connected to the RV LP
system. It is equipped with it’s own shut-off valve (black
handle). The quick connect is a regulated (low pressure)
LP line that is supplied from the onboard LP tank. The BBQ
quick connect works with the standard, full-flow male quick
connect fitting. You will need a BBQ that is set-up for a low
pressure LP source.
BASIC OPERATION:
1. Ensure the black valve is in the OFF position.
2. Remove the yellow cap and ensure the opening is clean.
3. Pull the sleeve of quick connect back and insert the male
quick connect fitting.
4. Push the male fitting until the sleeve snaps forward,
locking the fitting into the socket.
5. Connect your BBQ.
6. Turn the black valve ON to allow propane to flow to the
connected BBQ.
7. Ensure the main LP switch in the Utility Center is ON.
*LP hose and BBQ not included.
NOTE:
Propane will only flow from the BBQ quick connect
when there is a hose connected. This is a safety feature of this
component. The black valve must be in the OFF position to
release the hose from the quick connect.