Pleasure-Way ONTOUR 2.2 2021.5, Руководство пользователя

Страница: 53 / 68

41
AGS MANUAL SETUP
Select MANUAL SETUP for more in depth set up choices, this
will allow you to set all parameters for the AGS system. You can
choose BATTERY or HVAC system to trigger the AGS. You can
choose your RUN TIMES, QUIET TIMES and BATTERY CAPACITY for
shut down parameters.
Touch FINISH when complete to return to the POWER
MANAGEMENT main page. Touch AGS to enable the AGS system.
Hold CONTINUE for 5 seconds to trigger the AGS system.
NOTE: If both the LOW BATTERY VOLTAGE and the HVAC LOADS
are activated, whichever one needs the most run time to acquire
the desired result will override the other setting.
NOTE: When AGS is used for the HVAC system (air conditioning),
the appliance must be selected on the HOME page, the
temperature must be selected and set on the HOME page, and
the fan on the HOME page should be set to FAN AUTO.
START TRIGGERS
Select LOW BATTERY VOLTAGE or HVAC LOADS to turn on the
required triggers for AUTO GEN START. Buttons will display in light
blue when activated.
Use the + and – buttons to adjust the settings for:
•
GENERATOR START PERCENTAGE
•
NUMBER OF RESTART TRIES
RUNNING
Use the + and – buttons to adjust the settings for the GENERATOR
RUN TIME. This applies to the HVAC setting.
STOPPING
Use the + and – buttons to adjust the settings for the
PERCENTAGE OF BATTERY CHARGE before the generator will shut
OFF. This applies to the LOW BATTERY VOLTAGE setting.
QUIET TIME
Select QUIET TIME button to set the parameters for the QUIET
TIME settings.
Use the + and – buttons to adjust the settings.