Pleasure-Way ONTOUR 2.2 2021.5, Руководство пользователя

Страница: 31 / 68

19
DRAINING THE WASTE HOLDING TANKS
The black and grey water drain is located mid-body below the
running board on the driver’s side.
1. Press in the black and gray dump valve handles to ensure
the valves are closed.
2. Remove the black termination cap.
3. Remove the sewer hose from rear storage compartment.
Connect the sewer hose to the drain outlet, and put the
opposite end into an appropriate sewer dump outlet.
NOTE: Dump your black water first to allow your gray water to
flush the black water through the sewer hose.
4. Open the termination valve on the black water holding tank
(black handle). Once this tank is empty, open the valve for
the gray water holding tank (grey handle).
NOTE: A garden hose may be left running into the toilet with the
valve open to further rinse the tank and sewer hose.
5. Close the termination valves and replace the cap. Rinse and
replace your sewer hose back in its compartment.
6. Deodorize the empty tank by adding one gallon of water
mixed with commercial holding tank deodorizer to the tank.
NOTE: If the black water holding tank is allowed to overfill, the
overflow may back up through the toilet drain. If the gray water
tank is allowed to overfill, the overflow may back up through the
shower drain.
NOTE: If the gray water tank is allowed to overfill, the overflow
may back up through the shower drain.
NOTE: If you are using a sewer hookup in a RV park, keep the
valve closed until the holding tank is at least partially full, then
drain. The large quantity of waste flow will provide more effective
drainage and reduce tank stoppages.
NOTE: Before using your black water holding tank, deodorize it
by adding one US gal of water and commercial tank deodorizer
through the toilet.