Pleasure-Way LEXOR FL 2018, Руководство пользователя

Страница: 29 / 68

23
The Truma AquaGo
®
Comfort Plus water heater is a hybrid
water heater that combines the instant hot water source with
a
1/3
US gal water tank, and a recirculation system to provides
a continuous flow of hot water.
BASIC OPERATION
1.
Turn on the 12 volt battery disconnect switch.
2. Turn on the LP gas switch.
3. Turn on the water heater switch inside the exterior water
heater door.
4. Turn the water heater switch to ECO mode or COMFORT
mode (see the Truma manual to determine which is right
for you).
5. Start the water flow on hot at a medium flow and adjust
to the desired temperature.
WATER HEATER
Please refer to the manufacturer’s operating instructions for
further information.
TRUMA AQUAGO
®
COMFORT PLUS
(DLE60CP)
The water heater is located under the fridge next to the
furnace vent. You will have to remove the access panel
to inspect water lines or adjust bypass valves. Access to
the working mechanism of the water heater is through the
outside, vent door located mid-body on the driver side.
SUMMER MODE WINTER MODE
WATER HEATER BYPASS VALVES
OPEN: the handle is parallel to the water line.
CLOSED: the handle is 90 degrees to the water line.
SUMMER MODE
OPEN the bypass valve on the red line (hot water), blue line
(cold water) and white line (circulation).
CLOSE the bypass valve that connects the blue line from the
bottom to the red line from the top.
WINTER MODE
CLOSE the bypass valve on the red line (hot water), blue line
(cold water) and white line (circulation).
OPEN the bypass valve that connects the blue line from the
bottom to the red line from the top.
NOTE:
See the winterizing instructions in this manual for
winter storage information.