1
X
4
5
PACKAGE CONTENTS
2
3
6
HARDWARE CONTENTS
ASSEMBLY INSTRUCTIONS
3. Attach support ring (J) to legs (I) using M6
bolt (CC). Secure with wrench (FF) but
do not tighten at this time.
3
I
CC
Hardware Used
x 4
CC
M6X18 Bolt
1
Questions, problems, missing parts?
Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. - 4:30 p.m., CST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
ITEM #0000000
MODEL #OFW103RI
Français p. 9
Español p. 17
34 IN. ELIZABETH
SLATE FIRE PIT
70-10-003
Wa r m i n g Yo u r H o m e. W a r m i n g Y o u r H e a r t.
A
E
I
B
A
C
D
F
G
H
J
PART DESCRIPTION QUANTITY
A Handle
1
B
Mesh Wire Cover
1
C
Bowl Cover/Table Top
1
D
Cooking Grid
1
E
Wood Grate
1
F
Fire Bowl
1
PART DESCRIPTION QUANTITY
G
Ash Catcher
1
H
Slate Top
1
I Legs
4
J
Support Ring
1
K Poker
1
AA
BB
CC
DD
EE
M5X10 Bolt
Qty. 3
M5 Nut
Qty. 3
M6X18 Bolt
Qty. 4
M6 Keps Nut
Qty. 1
M6 Nut
Qty. 8
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:30 a.m. - 4:30 p.m., CST, Monday - Friday.
WARNINGS:
•
FOR OUTDOOR USE ONLY! NEVER LEAVE FIRE UNATTENDED!
•
DO NOT
allow children or pets near the fire pit without supervision.
•
DO NOT
touch surface of iron fire grate or fire bowl while in use.
•
NEVER
burn in vehicles, tents or indoors.
•
NEVER
place cover on fire pit when in use. Ensure fire pit and mesh wire cover have cooled
before placing cover over fire pit.
• Lift mesh wire cover by using poker when in use.
CAUTIONS:
• Burn only wood or fire logs in the fire pit.
•
DO NOT
use gasoline or kerosene to start the fire in your fire pit.
•
DO NOT
use this unit on a wood deck, long or dry grass and/or leaves, or on combustible
surfaces.
•
DO NOT
place or use fire pit under the canopy of trees as dry or falling leaves may catch fire.
•
DO NOT
stand or place objects over 25 lbs. onto bowl cover/table top as this may cause damage.
•
DO NOT
attempt to move the fire pit while it is hot or in use.
• Place the fire pit no closer than 8 feet from walls or combustibles during use.
• Adequate fire extinguishing material should be readily available.
• Always ensure that the mesh wire cover is secured over fire bowl while in use.
• Poker handle may become hot during and after use.
• Use heat-resistant gloves to handle hot tools.
PROPOSITION 65 WARNING: Fuels used in wood and charcoal burning appliances and the
products of combustion of such fuels, contain chemicals known to cause cancer, birth
defects or other reproductive harm.
Consumers should check State, Provincial, in addition to local codes and regulations
regarding the use of the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly: Wrench (included), Phillips Screwdriver (not included).
ASSEMBLY INSTRUCTIONS
1. Insert handle (A) into hole in mesh wire cover (B).
Use wrench (FF) to secure M6 Keps nut (DD) to
the underside of the mesh wire cover.
1
Hardware Used
DD
x 1
M6 Keps Nut
FF
x 1
Wrench
Hardware Used
AA
x 3
M5x10 Bolt
2. Attach ash catcher (G) to fire bowl (F) using
M5 bolt (AA) and M5 nut (BB). Tighten with
wrench (FF) and screwdriver.
2
BB
x 3
M5 Nut
FF
x 1
Wrench
DD
B
A
F
G
AA
BB
7
4. Attach legs (I) to the slate top (H), using M6
nut (EE). Tighten all screws (including
screws from step 3) with screwdriver and
wrench (FF).
4
EE
Hardware Used
x 8
EE
M6 Nut
J
I
H
5. For firepit use, put bowl (F) onto the slate top
assembly, put wood grate (E) into bowl (F),
put mesh wire cover (B) onto bowl (F). Keep
poker (K) near fire pit for use anytime.
5
F
K
6. For barbeque use, remove mesh wire cover, put
cooking grid (D) onto bowl (F). Keep poker (K)
near fire pit for use anytime.
6
ASSEMBLY INSTRUCTIONS
B
E
F
K
D
CARE AND MAINTENANCE
• To extend the life of your fire pit, clean it after each use and cover the unit to protect it
from the elements.
• To protect fire pit finish, use a soft cloth in lieu of bare hands while handling.
• Use a soft cloth to wipe fire pit and poker.
• Do not attempt to clean while hot.
• Clean ash catcher after each use once ashes have cooled.
• Store in a cool, clean, dry place.
ONE YEAR LIMITED FRAME WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain
warranty service, call 1-877-447-4768, Monday – Friday, 8:30 a.m. – 4:30 p.m. CST. This warranty
does not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner’s manual will also void this warranty. The manufacturer
will not be liable for incidental or consequential damages, or common erosion of outdoor products.
Some provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from province to province.
GHP Group, Inc.
8280 Austin Avenue, Morton Grove, IL. 60053-3207
K
FF
M6/M5 Wrench
Qty. 1
FF
x 1
Wrench
8
Printed in China
30-10-003
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-447-4768,
8:30 a.m. - 4:30 p.m., CST, Monday - Friday.
PART
DESCRIPTION
PART #
A Handle
40-07-453
B Mesh Wire Cover 30-05-001
C
Bowl Cover/Table Top
30-05-002
D
Cooking Grid
30-01-001
E
Wood Grate
30-01-002
F
Fire Bowl
30-01-003
G
Ash Catcher
40-08-116
H
Slate Top
30-01-004
I
Legs
30-01-005
J
Support Ring
30-06-001
K Poker
30-04-001
A
E
I
B
A
C
D
F
G
H
J
K
7. For table (leisure) use, place mesh wire cover (B)
upside down onto support ring (J) put bowl (F)
onto the slate top assembly, put wood grate (E)
into bowl (F), put cooking grid (D) into bowl (F).
Set bowl cover/table top (C) on bowl (F).
7
J
F
C
B
FF
x 1
Wrench
DESCRIPTION
PART #
Hardware Pack
30-09-001
