pleasant hearth OFG419T, Руководство пользователя

Страница: 9 / 79

9
Hardware Used
AA
Hardware Used
DD
1
2
3
1. Attach the knob (M) on the door (L) with one M4 X 5
screw (AA).
2. Attach an angle iron (D) to 1/4 table (C) with M6 X 12
bolt (DD). Repeat procedure to complete the assembly
of the rest of three 1/4 tables. Do not tighten completely
at this time.
Screw M4 X 5 x 1
x 4
Bolt M6 X 12
2
1
Hardware Used
DD x 12
Bolt M6 X 12
CC
x 8
Nut M6
L
M
D
C
GG
x 1
Wrench
ASSEMBLY INSTRUCTIONS
3. Line up holes in a 1/4 table (C) with corresponding
holes from another 1/4 table (C). Insert two M6 X
12 bolts (DD) through holes. Finger tighten with
two M6 nuts (CC). Be sure
1
and
2
are level and
fully tightened. Repeat procedure to complete the
assembly of the rest of 1/4 tables. Once the 4 panels
are connected with 2 bolts per connection point, use
another M6 x 12 bolt (DD) to secure the edges at four
points around the table. Tighten the loose bolts from
step two completely.
FF
FF
D
C
DD
DD
DD
CC
1
2
DD
C
AA
L
M
Phillips screwdriver
Phillips screwdriver
x 1
FF
Phillips screwdriver
x 1
x 1