3
Step 4
Step 5
4.
Set bottom panel (6) upright and insert 6
wood dowels (A) into pre-drilled holes in base
(6). Slip mantel assembly over dowels, into
pre-drilled holes in bottom edge of assembly.
Insert 2 Allen bolts (B) through flat washers (C),
through pre-drilled holes in right bottom edge of
assembly, and into pre-drilled holes in bottom
panel (6). Insert 2 Allen bolts (B) through flat
washers (C), through pre-drilled holes in left
bottom edge of assembly, and into pre-drilled
holes in bottom panel (6). Tighten securely
with Allen wrench (D).
5.
Insert 4 wood dowels (A) into pre-drilled
holes in top edge of mantel assembly. Slip top
panel (1) over dowels until snug, then secure
with flat washers (C) and Allen bolts (B) in pre-
drilled holes along top edge of assembly as
shown. Tighten with Allen wrench (D).
