4
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Lay base (C) upside down on a flat, smooth
surface. Attach rear legs (S) to back side of
base (C) by inserting bolts (AA) and washers
(BB) through predrilled holes in glue blocks on
base (C) and rear legs (S). Tighten with screw-
driver.
Repeat on front side of base (C) using front
legs (R), bolts (AA) and washers (BB).
2. Set base (C) upright. Insert 4 dowels (CC)
into predrilled holes in base (C) as illustrated.
Insert 2 dowels (CC) in predrilled holes in each
end of shelf rail (E). Slip left inner panel (J) and
right inner panel (K) over dowels in base (C).
Slip dowelled ends of shelf rail (E) into pre-
drilled holes in left inner panel (J) and right in-
ner panel (K) as illustrated. Secure by inserting
bolts (AA) and washers (BB) through predrilled
holes in bottom edge of inner panels and tight-
ening with screwdriver.
3. Insert 4 dowels (CC) in predrilled holes in
left side panel (F) as illustrated. Slip left edge
of top shelf (B) over dowels (CC) and slip left
edge of top rail (D) over dowels (CC) as illus-
trated. Attach with bolts (AA) and washers (BB)
inserted through predrilled holes. Tighten with
screwdriver.
Repeat on right side using right side panel (G).
ASSEMBLY INSTRUCTIONS
1
2
3
S
R
R
C
K
F
J
B
E
S
C
AA
BB
AA
BB
CC
D
G
AA
CC
BB
