6
TD-000368-01-A
Features
Amplifi er Front Panel
— Figure 1 —
1
2
3
4
5
6
7
8
11
12
13
14
15
16
9
10
1. Output channels are labeled A, B, C, and D
2. Output Channel Mute Buttons and LEDs (Red)
3. Output Channel Limiter LEDs (Red)
4. Output Channel -10 dB Below Limiter Activation LEDs (Blue)
5. Output Channel -20 dB Below Clip LEDs (Blue)
6. Soft Power Button (Blue/Red)
7. Channel Select Buttons and LEDs (Amber for Input, Blue for Output)
8. Input Channel Clip LEDs (Red)
9. Input Channel Signal-Present LEDs (Blue)
10. Input channels are labeled 1, 2, 3, and 4
11. LCD Graphic Display
12. HOME Button
13. ENTER Button
14. MASTER CONTROL Knob
15. EXIT Button
16. GAIN Button
Amplifi er Rear Panel
NOTE:
The PLD4.3, and PLD4.5 models have a different rear panel confi guration than the PLD4.2 rear panel. The difference is the
position of the fan and the connectors.
— Figure 2 —
A
C
B
D
X
2 OHM MIN IMPEDANCE PER CHANNEL
BRIDGED MODES 4 OHM MIN IMPEDANCE
UTILISER
UN CABLE
CLASSE 2.
BRIDGE,
140V ET
200V:
UTILISER
UN CABLE
CLASSE 3.
SPEAKER
WIRE
CLASS 2
EXCEPT
BRIDGE
MODES,
140V &
200V: USE
CLASS 3.
PARALLEL
PARALLEL
PARALLEL
PARALLEL
4
3
2
1
OUTPUTS TO SPEAKERS
BRIDGED OUTPUTS
ROUTABLE INPUTS
XLR
PIN 1
PIN 2
PIN 3
POWER
ON
USB
Y
1
2
4
5
7
8
10
9
6
3
1. USB Type B, 4-Pin
2. Four XLR-F Female Line Input Connectors
3. Four XLR-M Male Line Output Connectors
4. Four NL4 Output Connectors (Individual and Parallel)
5. Two NL4 Output Connectors (Bridged Outputs)
6. Cooling Fan
7. Power Switch
8. Locking IEC Power Connection (100 – 240 VAC, 50 – 60 Hz)
9. Rear Rack-mount Brackets
10. Front Rack-mount Brackets