This device contains electronics and other materials
which should only be disposed of in a proper disposal
facility designed to process electronic waste.
Please help protect our environment:
DO NOT dispose of this unit in household or office trash.
Step 7. Attach AV and power
Attach AV and power cables from your sources to the interface ports at the top of the unit. DO NOT ATTACH
source cables directly to the TV; ONLY attach the TV inputs to the interface ports at the bottom of the unit.
Make sure to use short cables to avoid snagging.
Step 8. Remote Control
Install the included battery in the remote control and test the operation of your
motorized stand/cabinet mount.
: hold down to adjust the TV to the left
: hold down to adjust the TV to the right
: hold down to tilt the TV upwards
: hold down to tilt the TV downwards
: one click to lift the TV all the way to the top
: one click to lower the TV all the way to the bottom
: one click to return TV to center position
: stops movement in current position
Connect the power and your
AV sources to the base ONLY.
Connect your TV to these
ports ONLY.
CAUTION!
Please ensure that the area around the television is free from any obstructions that
might prevent free movement of the unit, otherwise you may damage the television or motor.
Also make sure that your AV and power cabling are installed so that movement of the
television does not cause snagging or damage to your cables or connectors.
4
5
6
7
