A. Secure the Wall Support Bracket
Align the wall bracket and use a pencil to mark the
proper location on the rear wall. Pre-drill starter holes if
necessary and use wood screws or bolts as necessary
based upon the specfics of your cabinet construction.
B. Secure the Base
Mark and drill holes as necessary based upon the specifics
of your cabinet construction and firmly screw/bolt the base
to the floor of the cabinet.
Step 2. (B) Cabinet Installation
The lift mount must be secured directly to the back wall and bottom of the
cabinet (or other equivalent structural elements). The cabinet must be
able to support the combined weight of the TV and the lift unit. If in doubt
get professional advice.
Attach Wall Support Bracket and Lid Arm:
Remove the 4 screws on the stand and attach the wall support bracket
and lid arm, as indicated.
Mount within Cabinet:
Place the unit in the desired location inside the cabinet. The unit must be secured at the base and at the top. Do not
attempt to use the unit without the wall support and base screws securely installed.
B
A
Step 3. Attach Bracket Rail Assembly
The bracket rails are installed in the factory but
may need to be adjusted to ensure the rails are
centered by loosening the locking screws. Install
the entire bracket assembly to the top of the
lift using four bracket screws (
④
).
4
5
6
7
