PLD MOBO-CX50 Скачать руководство пользователя страница 7

Страница: 7 / 8

35˚

87˚

Install battery (included) and test operation of the mount.

Left/right rotation: 35° in each direction (from vertical center)

Tilt: 0° to 87° (from horizontal)

Extension: 40” (1000mm) (from retracted position)

Step 9. Attach AV and Power

Attach AV and power cables from your sources to the interface ports at the top

of the unit. DO NOT ATTACH source cables directly to the TV; ONLY attach the TV

inputs to the interface ports at the bottom of the extension arm. Make sure to use

short cables to avoid snagging.

Step 10. Remote Control

CAUTION!

Please ensure that the area around the television is free from any obstructions that

might prevent free movement of the unit, otherwise you may damage the television or motor.

Also make sure that your AV and power cabling are installed so that movement of the

television does not cause snagging or damage to your cables or connectors.

This device contains electronics and other materials

which should only be disposed of in a proper disposal

facility designed to process electronic waste.

Please help protect our environment:

DO NOT dispose of this unit in household or office trash.

: hold down and turns the TV clockwise

: hold down and turns the TV counter-clockwise

: hold down and tilts the TV up

: hold down and tilts the TV down

: one click to fully extend the ceiling mount and tilt TV to vertical

: one click to fully retract the ceiling mount and tilt TV to horizontal

from AV sources

to television

Содержание MOBO-CX50








