CAUTION!
Never attempt to manually extend or retract
the arm. Attempting to do so will damage the
unit and void the warranty.
Step 7. Place Television on Rails (2 people required)
First remove the locking blocks and hand screws if in place.
Carefully place the television on rails and check to make sure
it is properly seated in the bracket channels. Someone must
brace the television until the locking blocks are secure.
Step 6. Attach power cord and AV cables to upper housing
Now it is safe to test the function of the mounting arm. Use the
remote (see Operating Instructions) to lower mount to its fully
extended position and to ensure the rail bracket is in its
vertical position.
Slide the Locking Blocks into place.
Tighten the Locking Handscrews.
CAUTION!
All four locking blocks must be
properly installed before
attempting operation.
PLUG POWER IN HERE!
Step 8.
Secure Locking Blocks and Handscrews