Playtime Engineering Blipblox After Dark, Руководство пользователя

Страница: 6 / 26

- 3 -
—
As an alternative to batteries you can use the USB-DC adapter. Plug the round side of the adapter in the
back of the After Dark where you see “DC 5V ” and the other side into any USB adapter.
—
Batteries do not need to be removed to use power adapter, but adapter will not charge batteries.
—
Press the purple button on the back of the unit to turn on.
—
Battery levels. As soon as the unit is turned on, the "MOD 1" LED will indicate if your batteries are low or dead.
LED flashes yellow - batteries are running low, or you are using low-voltage rechargeable batteries. The After
Dark will operate at slightly lower volume to conserve power.
LED flashes red - there is not enough power left in the batteries for the After Dark to operate. Replace
batteries or connect USB power cable.
—
Auto-shutdown. If no buttons are pushed, or no MIDI data is received for 30 minutes, the After Dark will
automatically shut down to save power. Use the power switch to turn the After Dark off then on again to
restart. This can be disabled using the instructions on page 18.