4. Mark over 16" from center of bolts. Repeat Steps 1
through 3 for the second assembly.
(Fig. 3)
Fig. 2
Fig. 1
Fig. 2
Fig. 3
AIR RIDER ASSEMBLY
3. Install swing hangers to bracket using
³⁄₈
" x 1
¹⁄₄
" hex
head bolts and lock nuts as shown. Tighten with
⁹⁄₁₆
"
wrench and socket wrench.
(Fig. 2)
Caution: At least 10" minimum spacing is required from the closest point of all
other rides or stationary objects.
Caution: Cut off all protruding threaded ends of bolts with a hack saw flush to the
end of the nut and remove sharp edges with a metal file.
1. Connect handle to pivot arm using
³⁄₈
" x 1" hex head
bolt, two washers, and lock nut as shown. Tighten with
⁹⁄₁₆
" wrench and socket wrench. Repeat for other
assembly.
(Fig. 1)
2. Connect footrest to pivot arm using
³⁄₈
" x 1" hex head
bolt, two washers, and lock nut as shown. Tighten with
⁹⁄₁₆
" wrench and
socket wrench.
Repeat for other
assembly.
(Fig. 1)
3. Connect seat to pivot arm using
³⁄₈
" x 7" hex head
bolt, two washers and lock nut as shown. Tighten
with
⁹⁄₁₆
" wrench and socket wrench. Repeat for
other end.
(Fig. 2)
Fig. 2
16"
3
