Playnation Riviera Playhouse 1536, Руководство пользователя

Страница: 56 / 89

EQUAL
TIP: MAKE SURE THE DISTANCE BETWEEN THE GABLE ASSEMBLY AND THE ROOF OVERHANG IS EQUAL ON
ON TOP OF THE ROOF FRONT SECTION.
RIGHT UNTIL FINAL POSITION IS ACCOMPLISHED.
2: THE GABLE ASSEMBLY BOTTOM COUNTERSUNK HOLES WILL REMAIN EMPTY FOR NOW.
ASSEMBLY IS FLUSH AGAINST THE FRONT CORNER POSTS. THE GABLE ROOF PEAK SHOULD BE RESTING
MOUNT THE GABLE ASSEMBLY RESTING ABOVE THE BOTTOM WALL BOARD. MAKE SURE THE GABLE
STEP 18: ATTACHING THE FRONT GABLE
TO ASSURE THIS EQUAL DISTANCE (DO NOT FASTEN). IF NECESSARY SLIDE THE GABLE ASSEMBLY LEFT OR
BOTH SIDES. IT IS RECOMMENDED TO TEST FIT THE 1 X 4 X 29.29" ROOF FINISHERS FRONT LEFT AND RIGHT
3: AFTER THE GABLE ASSEMBLY IS IN ITS FINAL
POSITION GO INSIDE ON TOP OF THE DECK AND
PULL THE GABLE ASSEMBLY TOWARDS YOU
MAKING SURE IT IS FLUSH TO THE OUTSIDE OF THE
ROOF AND INSERT TWO 1-1/2" WOOD SCREWS
FROM UNDERNEATH THE ROOF INTO THE GABLE
ASSEMBLY ROOF PEAK. USE THE DIMENSIONS
SHOWN IN THE DIAGRAM TO THE LEFT TO INSERT
THE WOOD SCREWS IN THE CORRECT
LOCATION. REMOVE THE ROOF FINISHERS,
THESE WILL BE USED IN A LATER STEP.
SLIDE LEFT O
R RIGHT
(TEST FIT ONLY)
RIGHT
OVERHANG
ROOF
BOTTOM
(TEST FIT ONLY)
EMPTY
ROOF
ROOF FINISHER LEFT
EMPTY
OVERHANG
WALL BOARD
1 X 4 X 29.29"
1 X 4 X 29.29"
ROOF FINISHER
GABLE
ASSEMBLY
EQUAL
CLARITY
REMOVED FOR
NOTE:
CORNER POST
PULL TOWARDS
YOU
33-7/8"
"
7
6 8
33 78 "
46