Playnation Riviera Playhouse 1536, Руководство пользователя

Страница: 49 / 89

STARTER SHOULD BE CENTERED ON THE ROOF SUPPORTS, AND THE FLAT TOP END OF THE ROOF STARTER SHOULD
1: PLACE THE 1 X 4 X 76-7/8" ROOF STARTER REAR BOARD AT THE PEAK OF THE ROOF. THE HOLES IN THE ROOF
2: FASTEN THE ROOF STARTER REAR TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
BE PLACED FLUSH TO THE PEAK OF THE ROOF SUPPORTS.
STEP 11: ROOF STARTER REAR
MEASURE DIM A ACROSS THE BOTTOM OF THE ROOF SUPPORTS NEAR THE CORNER POSTS. WHEN
ATTACHING THE ROOF STARTER DIM B AT THE ROOF PEAK SHOULD MATCH DIM A. THIS WILL MAKE
THE ROOF SUPPORTS PARALLEL TO EACH OTHER. DUE TO WOOD MILLING VARIATIONS YOUR HOLES
IN THE ROOF STARTER WILL EITHER BE CENTERED ON THE ROOF SUPPORTS OR THEY WILL BE OFFSET
TOWARDS THE INSIDE OF THE ROOF SUPPORTS SLIGHTLY. SUBTRACT DIM A FROM 76-7/8" AND THEN
DIVIDE THIS NUMBER BY 2. THIS WILL GIVE YOU THE OVERHANG FOR EACH SIDE. USE THE
OVERHANG NUMBER ON EACH SIDE TO KEEP YOUR ROOF SUPPORTS PARALLEL.
ROOF STARTER
PER SIDE.
4-1/8" DIVIDED BY 2 EQUALS 2-1/16" OVERHANG
PEAK OF THE ROOF.
EXAMPLE: 76-7/8" MINUS 72-3/4" EQUALS 4-1/8".
SUPPORT AT THE
TOP OF ROOF
BOTTOM OF ROOF
SUPPORT ATTACHED
TO CORNER POST
OVERHANG
DIM B
3
DIM A
" EXAMPLE DIMENSION 72 4
76 78 " ROOF STARTER LENGTH
OVERHANG
(3-1/4" WIDE)
1-4-7688-RSR
1 X 4 X 76-7/8"
ROOF STARTER REAR
#8 X 1-1/2"
WOOD SCREW
3 14 "
FLUSH
39