background image

15

www.PlayMakar.com

STEP 5 - Turning On and Off Remote

•  To turn 

on

 the remote, press and hold the ON/+ button for 3 seconds. Settings will be shown 

on the display with backlight for 10 seconds. The most recently selected program will display.

•  To turn 

off

 the remote manually, press and hold the OFF/- button for 3 seconds. Or it will                    

automatically turn off when no button is pressed for 3 minutes. 

Note

Do not turn the remote on until the receiver pod(s) are properly attached to electrode pad(s).

Note

When stimulating the muscles of the arms or legs, muscle contraction may cause involuntary 

limb movement which may cause injury to yourself or others. Ensure limbs are secured to prevent 

movement.

STEP 4 - Turning On and Off Receiver Pod(s)

1.

 To turn on the receiver pod(s), press and hold the power button for 3 seconds.    

2.

 Blue backlight of the receiver pods will blink two times when it receives the signal from the 

 remote.

3.

 Wireless symbol        will appear next to "CH" on remote when successfully paired.

4.

 To turn 

off

 the receiver pod(s):

•  When treatment minutes are remaining

, reduce intensity to "0" then press and hold the          

OFF/- button for 3 seconds. 

•  When treatment minutes have not been set

, press and hold the OFF/- button or 

 

3 seconds. 

Note: 

 Pods will only turn off automatically under the following conditions:

•   Treatment minutes have expired.

•   No activity or if treatment intensity has not been set for 3 minutes.

Note

To prevent unpleasant electric shocks, never remove the pod and electrode pad while it is still 

turned on. However, in an emergency, you may unsnap the receiver pod from the electrode pad. 

Содержание PRO Series









































Отзывы: