For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
POLY WAVE SINGLE SLIDE V2
INSTALLATION INSTRUCTIONS
Rev A
10/9/2012
1704-V2
Page 3 of 4
Step 2
Attach Slide Sit Down Wall to deck and posts.
(See Note C)
Step 3
Attach Poly Wave Slide Footing V2 to Poly Wave
Slide V2 as shown in Figure 2. (See Note A)
Step 4
Place Poly Wave Slide V2 into footing hole and
attach to deck as shown in Figure 3.
(See Note A)
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Plumb and level entire component. Pour concrete
into footing hole. Allow at least 72 hours to cure
before using this equipment. (See Notes B & E)
Step 7
Place required protective surfacing under and
around Poly Wave Slide V2. (See Note E)
Washer
FOOTING V2
POLY WAVE SLIDE
Hex Bolt
3/8 x 3/4"
3/8" x 1" O.D.
POLY WAVE SLIDE V2
FIGURE 2
3/8" x 1" O.D.
POLY WAVE SLIDE V2
FIGURE 3
Button Head Bolt
3/8" x 1-3/4"
Washer
3/8" Lock Nut
3/8" x 1" O.D.
Washer
