For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
CURVED DECK CLIMBER ADAPTER
INSTALLATION INSTRUCTIONS
Rev A
6/28/2011
1107-ADP
Page 2 of 3
Footing Distance Table
Center of Post to Face of Adapter
Assembly
X (in.)
X (mm)
R3.5
14-13/16
376
R5
15-11/16
398
Top View
Step 1
Install Curved Deck. (See Note B)
Step 2
Refer to Top View and adjust footing hole location(s)
provided in attaching component's installation
instructions by the distance given.
(See Examples on Page 3)
Step 3
Align Adapter face to deck face and attach as shown
in Figure 2. (See Note A)
Step 4
Attach Access Wall to deck. Complete attaching Adapter
to deck face as shown in Figure 3. (See Notes A & B)
NOTE: Use (2) 3/8" x 1-1/2" Button Head Bolts included
with Curved Deck Climber Adapter assembly.
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Place required protective surfacing under and around
Curved Deck Climber Adapter. (See Note C)
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Washer
3/8" Lock Nut
3/8" x 1-1/4"
Button Head Bolt
FIGURE 2
CLIMBER ADAPTER
FIGURE 3
3/8" x 1-1/2"
Button Head Bolt
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Washer
3/8" Lock Nut
CLIMBER ADAPTER
X
(See Table)
