©2021
Installation
In-Ground Mount : Existing Concrete
Arc
Rack
TOOLS NEEDED
Level
Cement mixing tub
Shovel
Access to water hose
Fill holes with Super Por-Rok or epoxy grout.
An easy way to brace the Arc Rack while the grout sets is to bolt
two 1x4” boards together at one end and clamp them onto the
legs of the Arc Rack like a clothes pin.
Core holes no less than 6” diameter and no less than 11” deep
into sidewalk.
Place Arc Rack into holes, making sure the rack is level until the
grout has set. The welds at the base should be just bellow the
surface.
1
3
2
Trowel
Hole coring machine with 6” bit
Materials to build brace (see “Install Tip” at bottom of page)
TIP
Ø 6” min.
11” min.
