MPS-6 User Manual
16
APPENDIX: STREAM-X2 OPTION
Stream-X2 is an option that can be built into the MPS-6 Edelweiss Player. It offers streaming directly from
services such as Tidal, Quobuz, Deezer and vTuner. It can also be used to stream from network storage
(NAS) or from USB flash stick (no HDD supported) that is directly attached its own USB connector (Streamer
USB). It is a DLNA renderer and server and also supports the Roon network protocol. It makes your MPS-6
"Roon ready".
The Stream-X2 option must be installed in the MPS-6 player by either the factory or an authorized dealer. All
warranties are void when an end user installs this option.
Supported formats:
PCM up to 384kHz in WAVE, WMA, FLAC, AAC, AIFF, Apple Lossless,
and MP3 file formats
DSD up to 11.2MHz in DSF and DFF file formats.
NOTE: not all DLNA servers support DSD files and depending on your
NAS or DLNA server DSD files may not play correctly through Stream-
X2.
Supported network protocols:
DLNA, UPnP, Roon
Supported streaming services: Tidal, Qobuz, Deezer, vTuner
CONNECTING STREAM-X2 TO YOUR NETWORK
MODEL: MPS-6
MADE IN U.S.A.
TOSLINK
COAX
LEFT
RIGHT
LEFT
RIGHT
AES
RESET
USB
AUDIO
DIGITAL I/O AND CONTROL
ANALOG OUTPUTS
PLAYLINK
OUT IN
50/60 Hz
100W max.
USB
MEMORY
N
E
T
W
K
Streamer Network:
Connect this to your network router and make sure it is connected to the internet and
its wireless network is active. The Stream-X2 needs this network connection to connect
and play any streaming media from the internet. It also uses it to connect to your tablet
for remote control or to your Roon server.
Streamer USB:
This is where you can plug in flash sticks (no HDD supported) with music files that
Stream-X2 can play. If you want to use this connector often and the back panel of your
MPS-6 is not so easy to reach within your rack, you can use a short USB extender
cable to bring this connection to the front of the product where it is easier to reach.
Stream-X2 connections on back panel of MPS-6
Ethernet cable
Internet and other
network devices
Your tablet
(iOS or Android)
Your router
