Playback Designs MPD-3, Руководство пользователя

Страница: 4 / 13

MPD-3 User Manual
4
all shipping charges to and from Playback Designs. International customers must deal with
their local dealer or distributor.
For all warranty claims, a copy of the original invoice must accompany the product.
Opening the product or modifying it in any way by the owner, including but not limited to
cryogenic treatment, will void any warranty.
Please contact Playback Designs for a RA (Return Authorization) number and shipping
instructions before shipping any product to Playback Designs.
Playback Designs products are sold worldwide through authorized dealers with restricted
territories. If any Playback Designs product is purchased from non-authorized dealers or
from a dealer selling outside his / her authorized territory all warranties will be void.
If you purchased this product from a dealer please take a moment and send us an email to
support@playbackdesigns.com so we can register you for the warranty. If this product has
been shipped to you directly from Playback Designs you are automatically registered.
BEFORE USING THE PRODUCT
 What is in the box: MPD-3 playback system
Remote control unit with mounted batteries
USB cable
Power cord (110V versions only)
User manual
 Registration If you purchased this product from a dealer please take a moment and
send us an email to support@playbackdesigns.com so we can register you
for the warranty.
 Installation: The AC voltage supplied to the unit should match the voltage rating
indicated on the rear panel.
Do not place the player on the amplifier or any other equipment that
generates heat.
As the player may become warm during operation, always leave sufficient
space around the player for ventilation. Always allow adequate air
circulation around the player.
During operation, the disc rotates at high speed. Do not lift or move the
player while the disc is spinning. Doing so may damage the disc or the
player.
When moving the player, make sure to remove the disc and close the disc
tray. Then turn off the power and disconnect the power cord.