PlayAlive Wave, Руководство по установке

Страница: 9 / 11

8
5
Start up
5.1 Turn the system on and wait
5.2 Start a game and test the setup
If you have been able to conduct the steps as described in section
5.1 and 5.2 the PlayAlive product has been successfully installed.
Please complete the installation by fastning the screws holding the
satellites and game controller in place.
Thank you for your effort installing another PlayAlive product.
Go to the display and select a game. For this test please select Combo. When touching
the satellite that lit up please make sure that the satellite despawns (goes back to not
having a color). During the onboarding only one satellite will light up at a time. However,
once the onboarding is done (after making a combo of two), please make sure that; all
satellites spawns (gets a color), the game controller counts points for each selected sat-
ellite, that when selecting a satellite a sound is played, and that the satellites despawns
and respawns.
If this is not the case please see section 3.3 and all of section 4 again.
If desired an elaboration of the game, and the others included, can be seen in installa-
tion point 6 “Games included in Wave”.
Please turn on the power. The system will then start up. Note that this can take some
time as the start-up time depend on updates and internet connection. Though it will typ-
ically be between 5 and 10 minutes . Once started the game controller will light up and
the system is ready for you to select a game.
If this is not the case please check that the power cable is properly in, and that it does
in fact supply the game controller with power.
Important: Please finish
this installation by ensur-
ing that the screws hold-
ing the game controller
and satellites in place are
properly fastened.