PlayAlive Wave Скачать руководство пользователя страница 7

Страница: 7 / 11

4.3 Installation of satellites

Once the devicenet cables have been pulled the electronic components can be connect-

ed.

Start by identifying the satellites ID. All satellites have an individual ID labelled at its

rear. Please make sure that each satellite is placed correctly as illustrated in “placement

of satellites”.

Important:

When in-

stalling the satellites

please make sure that

the sattelites are turned

the correct way. This is

very important as some

of the games cannot be

played if the satellites are

turned the wrong way.

ID: 3

ID: 2

ID: 1

ID: 4

ID: 5

ID: 6

Connecting the satellites

Connect the satellites to the pulled

cables.

Note that the the cables cannot be installed wrong as they only

fit to the connector one way.

Satellites ID 1,2,3,4, and 5 will each be connected to the two

cables at their position. Where satellite 6 will only be connect-

ed to the one cable at its position. The chogori connector end

plug should be installed to this satellite as well.

Fixing the satellites. The satellites must be fixed to the Wave

legs with 3 Countersunk M5 x 12 mm

screws. The components

are designed so that the screws can be screwed in with one’s

fingers. Please do that to prevent a possible cold welding.

If this is not possible try to adjust the satellite, so that the

holes lign up better.

The holes in the wave legs are asymmetric to ensure the cor-

rect orientation, as this is important for some of the games.

The correct orientation of the satellites, are so PlayAlive’s logo

is turned in the danish reading direction, left to right.

It is advised to hold of on fixing the screws

completely

until

installation step 5 has been completed, so that you are sure

everything is working correctly.

Important:

The wave

legs have air holes placed

by the satellites. Please

make sure that they are

clear!

They enable potential

moisture to leave the

steel components.

Important:

Please start

by screwing the screws

in using your fingers,

to avoid a possible cold

welding. If this is not

possible try to adjust the

satellite to align with the

holes better. Then try

again, using your fingers.

Notice:

It is advised to wait

until point 5 is complete

before fixing the screws

completely.

Placement of satellites.

Important:

Please make

sure that there is

power running through

the cables when they are

being connected to the

satellites. This is import-

ant as having power run

through the cables while

cables are being con-

nected and disconnected

from the satellites could

potentially break the

satellites.

Содержание Wave












Результаты поиска

Содержание Wave

Отзывы:

Бренды по названию

Популярные бренды

PlayAlive Wave, Руководство по установке

Результаты поиска

Содержание Wave

Отзывы:

Бренды по названию

Популярные бренды