7
4
6. Install the backrest and seat
body;
Docking connector plug battery
compartment;
The card is placed on the vehicle seat with
two screws 4 * 12;
As shown: the backrest card placed on the
7.
Install strengthening board and
training wheels
As show in figure: remove the screws on
the strengthening board firstly, then fix
with training wheels by the screws.
As shown in figure: remove the screws on the
body firstly, then fix with strengthening board
by the screws.
USING NOTICE of 2.4G remote control is in the back of
the remote control.
1. Remove the door of the 6 screws;
2. Distinguish between the door, put door window on the
bodywork;
3. Screwed again;
8.
Install the door window only for
model
BBH
118.
