Play Mor Watch Tower, Руководство по сборке, Страница: 8 / 20

S
TEP
#7
Place a Rail #2 on one long side of the Floor. If you have installed the Attachment Beam
Block to this rail, be sure to install it on the
side from which the Attachment Beam will
extend. Fasten each end of the rail to the
Floor with 2 — 2¼” screws around each
countersunk hole.
R
AIL
#2
HARDWARE
(
THIS PAGE
)
10 — 2¼”
SCREWS
S
TEP
#8
Place the remaining Rail #2 on the other side of the Floor. NOTE: This rail can be re-
placed with a Rail #3. See “Helpful
Tips Before Assembly” at the front of
this manual.
Repeat the fastening proc-
ess outlined in Step #7. You will use 4 —
2¼” screws for Rail #2 or 6 — 2¼”
screws for Rail #3. (Rail #3 should have
a screw inserted into each center opening
upright from under the Floor.)