Play Mor Watch Tower, Руководство по сборке, Страница: 7 / 20

B. Fasten the block to the rail
with 10 — 3” screws. ( Screw
pattern illustrated far right.)
You will find 3” screws in the
Attachment Beam Hardware
Box.
S
TEP
#5
Pre-drill each countersunk hole on the Sandbox and Floor with a 3/16” drill bit.
Insert 1 — 3” lag bolt into each pilot hole.
S
TEP
#6
A. This step details the installation of the Attachment
Beam Block. If your play set will not have an Attach-
ment Beam, go directly to Step #7. Find the Attach-
ment Beam Block in the Attachment Beam Hardware
Box. Position the block on Rail #2 as pictured below
with the 4x4 end up. The bottom edge of this 4x4
(illustrated at right) should be aligned with the bottom
edge of the upper rim 2x6. Also, face the block so that
the bottom of the block is seated over the upper end of
one of the rail slats.
( The normal installation position
for an Attachment Beam
Block is at the center of Rail
#2 as pictured below. How-
ever, left or right of center is
possible as well.)
HARDWARE
(
THIS PAGE
)
20 — 3”
LAG BOLTS
P
RE
-
DRILL
E
ACH
H
OLE
I
NSTALL
L
AG
B
OLTS
A
TTACHMENT
B
EAM
B
LOCK
4
X
4 EN
D
S
CREW
P
ATTERN
U
PPER
R
IM
2
X
6
B
OTTOM
E
DGE