Play Mor Poly Watch Tower, Руководство по сборке, Страница: 6 / 28

Step #3
Place 1 - #1 (2x6x57”) on each side of the tower with the top of the 2x6 at 59
¼
”. Make
the 2x6 flush at both ends with the outside of the posts and fasten with 2 - 3” screws per
board (1 at each end). Repeat on the opposite side. This middle frame must be made the
same as the frame in step 1 with 2
- 2x6s on the inside and 2 on the outside.
59¼”
Step #3 - A
Place 1 - #1 (2x6x57”) on each end of the tower
with the top of the 2x6 at 59
¼
”. Make both ends
flush with 2x6s on the sides and fasten with 2 - 3”
screws per board. Repeat on the opposite end to
complete the middle frame.
Step 3
board
Step 3 - A
board
HARDWARE
(
THIS PAGE
)
8 - 3”
SCREWS