13
g)
Beat 1 plastic cap 40 x 40 each into the net hoop ends (back of square
tube).
h) Press net hoop to the outside. Stick from the top hexagon screw DIN 933,
M 8 x 60 through the 2
nd
borehole of the upper hinge and the hoop. Then
add washer DIN 125, Ø 8.4 mm at the hinge lower side and screw wing nut
DIN 315, M 8.
3. Assembly of the net:
Make sure that the groove of the goal is clean and all packing material or other
material is removed so that the assembly is possible without any problems.
a) Now fix and adjust the net rope in the groove. Then stick net holders with its
clips into the groove and fix them with a 90° rotation. Fixing is either possible
manually, with the key for hexagon socket screws or with a pliers (see bottom
pictures). Distribute net holders equally (same distances).
We recommend the following distribution of net holders:
crossbar
: 7 pieces
upright
: 5 pieces each
