Platypus Fire Pty Ltd makers of the
The Sensible Bushfire
Protection System
Refer to section 2 of this guide for information about bracket spacing and sprinkler pressure, flow and spacing.
All diagrams are to be used as guides only.
5
• Flow Control Insert fits into the Viega crimp-on
male adaptor
• Flow Control Insert fits into the copper olive male
union
• Flow Control Insert fits into the chrome brass
M&F adaptor
• Direction of water flow through the flow control
insert
Length overall: 17mm
Outside diameter: 15mm
Flow rate:
5.5lpm to suit 2.5mm nozzle or 9lpm to suit 3.2mm nozzle, not available for 4.0mm
nozzle
Maximum working temp: 80
o
C
Flow rate accuracy:
+or- 10% at 140 – 1000kpa
Valve must be installed the right way around or immediate failure may result. A direction of flow insert is stamped
on the outside diameter of the flow control insert.
Note: Copper olive union has been machined to suit
Flow Control Insert
Note: Chrome brass M&F adapter has been
machined to suit Flow Control Insert
Flow control insert data sheet
AUST PAT 2012254967 & US PATENT 9,403,175
