Platinum BLSL840, Руководство пользователя

Страница: 27 / 36

TECHNICAL SUPPORT: (909) 259-6001
BLSL840
25
Installation: Accessory Connections
ACCESSORY CONNECTIONS (continued):
Need to verify the proper connections before connecting the Radio Receiver.
The maximum voltage that the control board / battery can provide is about 28V
for external accessories. If there is an electrical shot in the power to the
accessories, the control board will protect itself by shutting down and will
remain shut down until the short is fixed.
Radio Receiver
Two modes of operation that a radio receiver
can control the gate:
Open-Close
By having the radio receiver connected as
illustrated and with the Timer OFF:
Every command of the radio transmitter
will control the gate as follow:
A. First command opens the gate
B. Second command CLOSE the gate if at
open position
C. Third command OPEN the gate
D. Any subsequent commands will continue
in the same order to control the gate.
This type of configuration is not recom-
mended for a commercial installations.
Open Only
By having the radio receiver connected as
illustrated and with the Timer ON:
Each command of the radio transmitter is
ALWAYS AN OPEN COMMAND to the gate.
RED
BLACK
GRAY
GRAY
MS-109950
Receiver
Linear MS-109950
Installation Diagram
BLSL840 Manual_Layout 1 3/6/2014 5:01 PM Page 27