Platinum CCTV PT-BF5421-T, Установка и настройка

Страница: 29 / 41

Configuring Camera & Blackbody
4. Enable “ Temperature Report ” and “ High Temperature Abnormal Alarm ” functions ( 4 ), “ High temperature abnormal alarm ” set to 37.3
℃
by default, then the
thermal camera can send the alarm and report to MicroNVR or AVM software (optional).
5. Temperature Lower Limit ( 5 )
：
Increase the lower limit of temperature detection: for example, if it is set to 25
℃
, the target below 25
℃
will not be detected.
6. Enable “Audio Linkage” and “White light” ( 6 ) for alerts if desired.
7. Increase the size or scaling of the face identification frame as needed. This is the area where the camera will watch for faces to measure.
8. Click Save.
1
2
3
4
5
6
7
8
Enable Smart Plan
Configure
Blackbody
Set Body
Temp Rules
Smart
Channel
Settings
Temperature
Compensation
Settings
Video Target
Settings
Final Testing
Set up Temperature ranges and Alerts