manualshive.com logo in svg

Platinum Access Systems UGP-712, Руководство по установке

Поделиться
Скачать
Platinum Access Systems UGP-712 Скачать руководство пользователя страница 18

UGP-712

17

OVERALL DIMENSIONS

1.    READ AND FOLLOW ALL INSTRUCTIONS.

2.    Never let children operate or play with gate controls. Keep the remote control away from children.

3.    Always keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING 

GATE.

4.    Test the gate operator monthly. The gate MUST reverse on contact with a rigid object or stop when an 

object activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate 

operator. Failure to adjust and retest the gate operator properly can increase the risk of injury or death.

5.    Use the emergency release only when the gate is not moving.

6.    KEEP GATES PROPERLY MAINTAINED. Read the owner’s manual. Have a qualified service person make 

repairs to gate hardware.

7.    The entrance is for vehicles only. Pedestrians must use separate entrance.

8.    SAVE THESE INSTRUCTIONS

Important Safety Instructions

WARNING:

 to reduce the risk of injury or death:

Important Safety Instructions

    

 

    

 

  

  

 

 

  

 

 

  

     

  

        

   

  

    

 

  

   

 

  

     

    

  

  

    

  

 

 

 

 

 

 

16.61"

9.375"

9.3/8"

6.61"

2.24"

Approx

.

0.59" 

1.375" 

Electrical hole

Drain Opening

Top View

Side View

www.BrushlessGateOpeners.com  |  (800) 878-7829  |  [email protected]

Содержание UGP-712



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды