N
C
C
O
M
N
O
O
U
T
G
N
D
E
X
IT
Fig.1
Fig.2
OPERATIONS
1.
Normal Mode
Selected by Mode SW (“
NORM
” position), "Red" light flash
a.
To open gate by key code, enter 4 or 5 key code.
b.
To open gate by card, sweep card to activate control relay.
c.
To hold open, enter #3xxxxx. xxxxx: 5 digit code
(00000-99999)
d.
To release hold open, enter #3xxxxx again.
Status:
Beeping twice with green light:
Success
Beeping once:
Code is not match
2.
Program Mode
Selected by Mode SW (“
PRGM
” position), "Yellow” light on.
Program Key Code:
Enter 4 or 5 key code
Program Card without Card ID:
Sweep card.
Program Card with Card ID:
Enter card ID, #5xxxx (xxxx: 0000-1999
card ID), Then sweep RFID card to program the card code into ID
0000-1999.
Note: Sweep RFID card one by one sequentially, the card ID will
automatically increase by 1.
Status:
Beeping twice with green light:
Program success
Beeping once with red light:
Program fail
Program Command
:
a. RF receiver control channel (default ch1, receiver relay channel)
#101
Control ch1
#102
Control ch2
#103
Control ch3
#104
Control ch4
