ANALOGUE DRUMS
PLASTIQUE
REFERENCE MANUAL AD25
Multi-Channel Output Routing
When you first load a “multi” mapping the Kontakt channels may output to a single stereo
channels in the host application. If this is the case for you, to utilize multiple outputs from
Kontakt you will need to assign the Kontakt channels to specific channels in your host application:
1. Open Kontakt in multi-channel mode (
16x Stereo Channel
mode is recommended).
2. You may need to take additional steps to configure the channels in your DAW to receive
multiple channels of output from Kontakt. Consult your DAW documentation to do this.
3. Once you have Kontakt loaded in multi-channel mode, load the file:
Plastique MULTI
v1.80.nkm
4. Click on
Kontakt’s Output Mixer icon
, it will show output channels similar to those below
5. Initially each of these channels may be set to output to the main stereo (1|2) output from
Kontakt. To send audio to other channels in your DAW, click on the buttons under each
channel to change them to your desired DAW output channel.
Click each of the
1|2
buttons, and change them to the desired channel number
PAGE 5 ©2015 ANALOGUE DRUMS DOCUMENT REVISION 1.80 5 JUNE 2015
