ANALOGUE DRUMS
PLASTIQUE
REFERENCE MANUAL AD25
Download & Installation
Before you begin you will need a minimum of
3.5GB
free disk space to successfully download, and
then unzip and use the sample library. The unzipped library will be approximately
1.9GB
.
1. Download:
After purchase you will be emailed instructions to download one or more .zip
files from the Analogue Drums website. Download all of these files and save them to your
computer, make sure you save all files to the same folder.
2. Unzip:
Locate the files that you have downloaded and unzip them. The standard unzipping
tools should work on modern Windows and Apple computers.
Once you have extracted the files they are ready for use, there is no further “install” required.
Native Instruments Kontakt
Loading
1. Open Kontakt either in standalone mode or via a sequencer. In the files tab of Kontakt
browse to the
Analogue Drums
/
Plastique
folder on your hard drive and select a
mapping file to load.
2. You may see a message that says “Samples Missing” - if so click on the
Browse for folder
button. Then browse to the
Analogue Drums
/
Plastique
/
Samples
folder and click OK.
Kontakt will then locate all of the files. After the kit has loaded you should save the kit to
avoid having to locate the samples again. You should save as
Patch Only
.
The kit will now be loaded. Depending on which DAW/sequencer/MIDI input devices you are using
there may be additional steps before the kit is available for use within your DAW, please refer to
the documentation for Kontakt, your sequencer/DAW and/or MIDI device setup to enable Kontakt
to be used on your track.
PAGE 4 ©2015 ANALOGUE DRUMS DOCUMENT REVISION 1.80 5 JUNE 2015
